Cleaning a tape drive, Figure 41 sample select cleaning cartridge screen – Quantum ATL M-Series User Manual
Page 97
Chapter 4 Performing Maintenance Operations
Cleaning a Tape Drive
ATL M-Series User’s Guide
79
Cleaning a Tape Drive
4
To clean a tape drive:
1
Access the
Maintenance
2
Press
Clean
.
The GUI displays the
Select Cleaning Cartridge
screen (see
). A flashing arrow indicates the currently selected
source element.
Figure 41 Sample
Select Cleaning
Cartridge Screen
3
If the library is an ATL M1500 in a multiple library stack or an
ATL M2500, press the
Level
button to select the level where the
cleaning cartridge is located.
4
Press the
Up
and
Down
buttons to select the source element that
contains the cleaning cartridge.
5
When the flashing arrow is next to the source element that
contains the cleaning cartridge, press
Select
.
The GUI displays the
Select Tape Drive
screen (see
). A
flashing arrow indicates the currently selected drive.