Figure 51 sample move cartridge to screen – Quantum ATL M-Series User Manual
Page 108
Chapter 5 Running Diagnostic Programs
Running the Move Medium Test
90
ATL M-Series User’s Guide
7
Press the
Up
and
Down
buttons to select the source element of
the cartridge.
8
When the flashing arrow is next to the desired source element,
press
Select
.
The GUI displays the
Move Cartridge TO
screen (see
A flashing arrow indicates the currently selected destination
element.
Figure 51 Sample
Move Cartridge TO
Screen
9
If the library is an ATL M1500 in a multiple library stack or an
ATL M2500, press the
Level
button to select the level where the
desired destination element is located.
10
Press the
Up
and
Down
buttons to select the destination
element for the cartridge.
11
When the flashing arrow is next to the desired destination
element, press
Select
.
The GUI displays the
Confirm Move Cartridge
screen (see