Quantum ATL M-Series - Manual (Page 182)

Appendix C DLTtape Cartridge Maintenance
Visual Inspection of DLTtape Cartridges
164 ATL M-Series User’s Guide
5 Gently press the hub, then release it. Make sure the hub springs
back into place and is still centered within its circular opening.
6 Open the tape cartridge door (see figure 58 ):
a Gently press up on the tab at the right side of the tape
cartridge door.
b Swing the door open.
Figure 58 Opening
the Tape Cartridge
Door
7 Verify that:
• The tape is wound tightly on the reel
• The tape leader loop is sticking up about an eighth of an
inch
• The tape leader loop is not bent or torn
8 Check for proper operation of the tape cartridge’s write-protect
switch (see figure 59 ).
Caution: If any of the above conditions are not met, do not
use the cartridge.
Tape
cartridge
door Tab