Quantum ATL M-Series - Manual (Page 87)

Chapter 3 Changing the Library Configuration
Changing the Import/Export Setting
ATL M-Series User’s Guide 69
6 Use the Up or Down buttons to select the correct month.
7 Press Select .
The year setting is highlighted.
8 Use the Up or Down buttons to select the correct year.
9 Press Select .
10 Press Main to return to the main screen.
Changing the Import/Export Setting
3
The Import/Export option controls whether the host recognizes the
slots of the top left magazine as import/export elements or as
storage elements:
• Import/export elements are used to move cartridges in and out
of the library under host control. Because these elements are
used exclusively for importing and exporting cartridges, they
are left empty during normal library operation, reducing the
storage capacity of the library.
• Storage elements are used to store data cartridges. Using
storage elements to import and export cartridges can be risky
since these operations are not controlled by the host.
Table 5 describes each of the possible settings for the Import/Export
option.
Caution: If you do not return to the main screen after
changing this setting, your change will not be
saved to NVRAM.