Ricoh 500SE - Manual (Page 48)

If
yo
u
are u
s
in
g
th
e
ca
mera
fo
r th
e
fi
rst ti
me
, r
e
ad
th
is
secti
o
n
.
45
1
Turn the mode dial to 5/K.
2
Press the t (Self-timer)
button.
• The Self-timer symbol appears on
the screen.
• The [10] to the right of the symbol
indicates the number of seconds.
In this case, if you press the
shutter release button, the camera
will shoot after 10 seconds.
• Each press of the t (Self-timer) button changes the self-timer
setting in the following order: 10 sec, 2 sec, and Self-timer Off.
3
Press the shutter release button.
• The focus is locked, and the AF auxiliary light blinks when the
self-timer starts.
Note ---------------------------------------------------------------------------------------------------
• Once the picture is taken, the self-timer turns off.
• When the self-timer is set to 2 seconds, the AF auxiliary light does not blink.
t Using the Self-Timer
You can set the Self-timer to shoot after either two or ten seconds.
A setting of two seconds is useful for preventing camera shake.