Ricoh 500SE - Manual (Page 184)

181
9
U
s
ing th
e
GP
S Fu
nc
tion
This section explains how to connect the camera to the Bluetooth
®
GPS unit to receive GPS information using a SPP.
There are two ways to connect the devices.
• Manually connect to a device (GP.181)
• Automatically connect to a previously connected device
(GP.183)
1
Display the Expanded Settings menu.
• For the operating procedure, see P.155.
2
Press the " button to select
[BT SERIAL] and press the $
button.
• When the Bluetooth
®
function is used
for the first time, a screen appears
confirming whether to search for a
destination device.
• If you have already searched for a
destination device, a list of destination
devices appears. Go to Step 4.
• If the camera is connected using a wireless LAN connection, a screen
appears confirming whether to disconnect the wireless LAN
connection. Select [YES] and press the MENU/OK button, and go to
Step 3 or Step 4. (Only for Caplio 500SE-W)
3
Press the #$ buttons to select
[YES] and then press the
MENU/OK button.
• The camera begins searching for a
Bluetooth
®
GPS unit and a list of
destination devices appears when the
search is completed.
• By default, up to five devices can be
discovered, but you can change this to
search for any number of devices between one and ten. (GP.176)
Obtaining GPS Information
Manually Connecting to a Device (BT SERIAL)