Ricoh 500SE - Manual (Page 130)

127
Ch
an
g
in
g
Camera S
e
ttin
g
s
6
You can use the settings registered in [REG. MY SETTINGS] for the
startup settings.
1
Display the SETUP menu.
• For the operating procedure, see P.107.
2
Press the " button to select [START SETTINGS] and
press the $ button.
3
Select [SETTING1] or
[SETTING2] and press the
MENU/OK button, or # button
and press the MENU/OK
button.
• If you do not use the my setting
function, select [OFF].
4
Turn your camera off.
• The settings to be used at the next power-on will be changed.
Note ----------------------------------------------------------------------------------------------
• When [START SETTINGS] is set to [OFF], settings are retained as usual.
• When [START SETTINGS] is set to [SETTING1] or [SETTING2], the camera settings
made with [REG. MY SETTINGS] are used at power-on even if [RESTORE
DEFAULTS] is selected.
Settings Saved by My Setting Function
Changing the Startup Settings
(START SETTINGS)
PIC QUALITY/SIZE DATE IMPRINT
ANTIBLUR WHITE BALANCE
FOCUS ISO SETTING
Focal distance used in Manual Zoom position
PHOTOMETRY Macro
SHARPNESS Flash
CONT. MODE Scene Mode
COLOR DEPTH DISP. Mode
EXPOSURE COMP. DENSITY
TIME EXPOSURE FRAME RATE
IMAGE WITH SOUND ENLGE PHOTO ICON