Ricoh 500SE User Manual

Page 170

167

Usin

th
e

Blu
e

Fu
nc
tio

Check that the destination device (computer) is turned
on.

Press the 6 (Playback) button.

• For Caplio 500SE-W, check that [CHANGE COM] is set to [BT] on the

Expanded Settings menu. (GP.193)

• To send all still images, go to Step 4.

Press the #$ buttons to select an image to send.

Press the MENU/OK button.

• The Playback Setting menu appears.

Press the " button to select
[FILE SEND] and press the $
button.

• When the Bluetooth

function is used

for the first time, a screen appears
confirming whether to search for a
destination device.

• If you have already searched for a

destination device, a list of destination
devices appears. Go to Step 7.

• If the camera is connected using a serial connection, a screen appears

confirming whether to disconnect the serial connection. Select [YES]
and press the MENU/OK button, and go to Step 7.

Press the $ button to select
[YES] and then press the
MENU/OK button.

• The camera begins searching for a

destination device and a list of
destination devices appears when the
search is completed.

• By default, up to five devices can be

discovered, but you can change this to
search for any number of devices between one and ten. (GP.176)

Sending One or All Still Images