Ricoh 500SE - Manual (Page 106)

103
Di
rect
Pri
n
ti
n
g
5
9
Repeat Steps 7 and 8 to select all the still images to be
printed and the number of copies for each.
10
Press the MENU/OK button.
• The Direct Print menu appears.
11
Press the !" buttons to select
an item, and then press the $
button to display the detailed
options screen.
• When [CONNECTING...] is displayed,
the connection to the printer is not yet
established. When a connection is
established, [CONNECTING...]
disappears and [DIRECT PRINT]
appears. Proceed with this step after the connection is established.
• For available settings, see P.101.
12
Press the !" buttons to select the setting, and then
press the MENU/OK button.
• The display returns to the Direct Print menu.
13
Repeat Steps 11 and 12 to change other settings as
required.
14
Press the MENU/OK button.
• The selected still images are sent to the printer and the [SENDING...]
screen appears.
• Pressing the DISP. button cancels the operation.
• When all the selected still images have been sent from the camera to
the printer, the camera display returns to the Direct Print playback
mode screen.
Note ----------------------------------------------------------------------------------------------
• Only images with a printer mark ( ) are printed. If you cancel printing and then try
to print again, make sure that the printer mark is on the images you want to print.
• The same still image can also be printed several times on a single sheet.
• The available items vary depending on the functions of the printer.
• To print images using the printer’s default settings, select [PRINTER SELECT] on the
detailed options screen.