Ricoh 500SE - Manual (Page 220)

217
10
U
s
in
g
th
e W
irel
ess
L
AN F
u
n
c
tio
n
(O
n
ly
fo
r Cap
lio
500S
E-W
)
1
Check that the destination device (computer) is turned on.
2
Turn the mode dial to 5/K and shoot the picture.
3
Press the Q (Quick Review) button.
• A screen appears confirming whether to send the file.
4
Press the MENU/OK button.
• If [SEND CONDITION] is set to [ON],
the [SEND TO] screen appears.
• If [SEND CONDITION] is set to [OFF]
(GP.219), sending to the destination
selected in [SEND TO] (GP.220)
begins, and the progress is displayed.
• If the communication list has not been
transferred, or if [SEND CONDITION] is
set to [OFF] (GP.219) and the destination setting is incorrect, an error
message appears and the display returns to the Playback Setting menu.
• If the camera is connected with a Bluetooth
®
-enabled device, a screen
appears confirming whether to disconnect the connection. Select
[YES] and press the MENU/OK button. (GP.174, P.182, P.184)
5
Press the !" buttons to select
the desired destination device
and then press the MENU/OK
button.
• Transfer of the files to the destination
device begins and the progress is
displayed. Pressing the DISP. button
cancels the operation. Pressing the
6 (Playback) button or shutter
release button or turning the mode dial also cancels the operation.
• If an error message appears during transfer, follow the message
instructions and resend the files. For details about the error messages,
see P.223.
• Once the connection is established,
the camera returns to shooting mode
and remains connected to the
destination device. You can change to
playback mode or voice memo mode
or remain connected to the destination
device until the camera is turned off.
The wireless LAN antenna icon
appears on the LCD monitor while the
camera is connected.
When [QUICK SEND MODE] is set to [2TOUCH]