Ricoh 500SE - Manual (Page 211)

208
10
U
s
in
g
th
e W
irel
ess
L
AN F
u
n
c
tio
n
(O
n
ly
fo
r Cap
lio
500S
E-W
)
6
Change the setting.
• Only alphanumeric characters can be entered with the keyboard
screen. For information on how to use the keyboard, see P.163.
7
After completing changes, press the MENU/OK button.
• The display returns to the settings display screen.
• To edit other settings, repeat Steps 5 to 7.
8
Press the DISP. button.
• The display returns to the setup category display screen.
• To edit other setup categories, repeat Steps 4 to 8.
9
Press the DISP. button.
• The display returns to the [SEND TO] screen.
• To edit other destinations, repeat Steps 3 to 9.
10
After completing changes, press the MENU/OK button.
• The display returns to the Expanded Settings menu.
11
Press the MENU/OK button.
Caution------------------------------------------------------------------------------------------
• In Caplio Setting, if the [Cryptography]/[Authentication] on the [Wireless LAN] tab are
set as follows (GP.196), [Cryptography/Authentication] is automatically set to
[OFF/OPEN] when [Connection Method] in [W/LESS LAN] is set to [AD-HOC].
[AES]/[WPA-PSK], [AES]/[WPA2-PSK], [TKIP]/[WPA-PSK], [TKIP]/[WPA2-PSK]
• When [Cryptography/Authentication] in [W/LESS LAN] is changed on the camera,
check the network key. (GP.197)
• If [Cryptography/Authentication] is set to [WEP/OPEN] or [WEP/SHARED], enter the
[Network Key] as below.
[String]: Five characters or 13 characters
[Hex]: Ten characters or 26 characters
• If [Cryptography/Authentication] is set to [AES/WPA-PSK], [AES/WPA2-PSK], [TKIP/
WPA-PSK], or [TKIP/WPA2-PSK], enter an 8 to 63 character network key.