Ricoh 500SE - Manual (Page 32)

If
yo
u
are u
s
in
g
th
e
ca
mera
fo
r th
e
fi
rst ti
me
, r
e
ad
th
is
secti
o
n
.
29
To turn the power on:
1
Press the power button.
• After the start sound, the auto focus/
flash lamp blinks for several
seconds.
Using the Camera in Playback Mode
• Pressing the 6 (Playback) button
for more than one second turns on
the camera in playback mode,
allowing you to start playback at
once.
To turn the power off:
1
Press the power button.
Caution-----------------------------------------------------------------------------------------------
• When the camera is turned on with the 6 (Playback) button, pressing the 6
(Playback) button again switches playback mode to recording mode.
• After the camera is turned on, it takes longer for the camera to become ready for
shooting when using the flash than when not using the flash.
Auto Power Off ------------------------------------------------------------------------------------
• If the camera goes unused for a set period of time, it will automatically turn itself off
to save power. (Auto Power Off)
• The Auto Power Off setting can be changed. (GP.113)
Turning the Power On/Off