Ricoh 500SE - Manual (Page 207)

204
10
U
s
in
g
th
e W
irel
ess
L
AN F
u
n
c
tio
n
(O
n
ly
fo
r Cap
lio
500S
E-W
)
14
Click [Transfer to Camera].
• A screen appears confirming
whether to update the
information set in the camera.
Click [Yes] to update the
information. Click [No] to cancel
the update.
• After Step 10, if [Transfer to
Camera] is clicked without
clicking [Apply], a message
appears confirming whether to
save the edited setting. Click
[OK] to save the edited setting.
Click [No] to cancel the transfer
of the communication list.
• Transfer of the communication list begins, and once the transfer is
completed, a message indicating this appears.
15
Click [OK] on the message box.
16
Click [OK] on the [Caplio Setting] screen.
• Caplio Setting closes.
Note ------------------------------------------------------------------------------------
The settings made on the [Caplio Setting] screen (Detailed Setups and
Communication List settings) are saved regardless of whether or not they are
transferred to the camera or saved on the computer. When Caplio Setting is
restarted, the last settings used are displayed.
17
Turn off the camera and disconnect the USB cable from
the camera and computer.
• For disconnecting the USB cable, see P.153.