Ricoh 500SE - Manual (Page 178)

175
8
Usin
g
th
e
Blu
e
to
o
th
®
Fu
nc
tio
n
The authentication passkey is a code used to authenticate two
devices connecting using the Bluetooth
®
function.
If a passkey is required to connect to a destination device, the
authentication passkey can be registered in the camera beforehand
so that the passkey can be authenticated automatically when
connecting to the device.
1
Display the Expanded Settings menu.
• For the operating procedure, see P.155.
2
Press the " button to select
[PASS KEY] and press the $
button.
• The keyboard screen appears.
3
Use the keyboard to enter the
passkey set on the destination
device.
• For information on how to use the
keyboard, see P.163.
• To set the passkey on the destination
device, see the documentation that
came with the destination device.
4
Press the MENU/OK button.
Note ----------------------------------------------------------------------------------------------
• The maximum size of the passkey that can be entered with this camera is 16
alphanumeric characters.
• If no authentication passkey is registered, the passkey must be entered when
connecting the camera to the destination device. (GP.162)
• Only one authentication passkey (for one destination device) can be registered. To
connect to several devices at the same time (GP.177), the authentication passkey
must be the same on all connecting devices.
• To change a registered authentication passkey, enter a new passkey in Step 3 and
press the MENU/OK button.
Making Advanced Bluetooth
®
Settings
Registering an Authentication Passkey for a
Device (PASS KEY)