Roland LX-10 - Manual (Page 93)

93
Connecting to Other Devices
1. Turn the volume all the way down on the LX-
10 and on the audio device you’re about to
connect.
2. Turn off the power to the LX-10 and
connected audio device.
3. Use audio cables (sold separately) to make
the connection.
4. Switch on the connected audio device.
5. Switch on the LX-10.
6. Adjust the volume level on the LX-10 and the
connected audio device.
The sounds from the connected audio device are played by
the LX-10.
Adjust the volume by using the controls of your audio
device.
Turning Off the Power
1. Turn the volume all the way down on the LX-
10 and on the connected speakers.
2. Turn off the LX-10.
3. Turn off the connected audio device.
Playing Sounds of an Audio Device through the LX-10
RCA pin-type Input jacks are located
to the lower left of the front of the
LX-10.
They provide a convenient way to
connect portable audio devices.
Input jacks
Audio System, etc.
Output (Line Out)
LX-10_e.book 93 ページ ２００８年９月２２日 月曜日 午前１０時５１分