Roland LX-10 - Manual (Page 82)

82
Various Settings
For each part of the song data, you can specify whether or not it
will be sounded.
1. Hold down the [Effects] button and press the
[3D] button.
The LX-10 will enter Function mode.
2. Use the [ ▲ ] [ ▼ ] buttons to select “Part Mute.”
3. Press the [ ] button.
The following appears in the display.
fig.d-PartMute.eps
4. Use the [
▲
] [
▼
] buttons to select a part.
5. Use the [-] [+] buttons to select the playback
status for that part.
If you press the [+] button, an “M” will appear at the left of
the selected part, and that part will be muted (i.e., it will not
be heard). If you press the [+] button once again, muting
will be cleared.
fig.d-PartMute2.eps
If you press the [-] button, an “M” will appear at the left of
parts other than the selected part, and only the selected
part will be heard (“soloed”). Press the [-] button once again
to clear this setting.
fig.d-PartMute3.eps
Here’s how to switch the part that will be muted when you press
the [Accomp] track button and turn off its light.
The change you make to this setting will not be
applied until you select a song.
You can choose the way in which songs are played back on the
LX-10; one song at a time, or all songs successively.
Song Playback Settings
Determining the Parts that Sound
(Part Mute)
Using the [Accomp] Button to Switch
the Part to be Muted (Accomp Track)
Setting Description
Accomp &
Rhythm
Both the accompaniment and rhythm will
be muted.
Accomp
Only the accompaniment will be muted.
(The rhythm will not be muted.)
Rhythm
Only the rhythm will be muted.
(The accompaniment will not be muted.)
Changing the Song Playback Method
(Play Mode)
Setting Description
One Song
Songs will play one at a time.
When the selected song has played to the
end, playback will stop.
All Song
All internal preset songs, all songs in internal
memory, or all songs in USB memory will
continue being played consecutively.
Most commercially available SMF music files consists of
sixteen channels (parts).
Each channel contains a separate performance; for example,
channel 1 might contain strings and channel 2 bass, with the
drums on channel 10. The song data consists of these sixteen
channels of performances, played back simultaneously.
fig.MelodyChannel.eps
Channel 1
Channel 2
:
Channel 10
Strings
Bass
:
Drums
:
Channel 16
:
Guitar
NOTE
LX-10_e.book 82 ページ ２００８年９月２２日 月曜日 午前１０時５１分