Roland LX-10 - Manual (Page 46)

46
Performing
Turning Off Split Play
1.
Press the [Split] button so its illumination is turned off.
The right-hand tone becomes the tone for the entire keyboard.
When you switch from Dual Play (p. 42) to Split Play, the Tone 1 used in Dual Play is selected as the
right-hand one for Split Play.
Changing the Right-hand Tone
1.
Press the Tone button to choose a tone group.
2.
Press the [-] [+] buttons to select a variation tone.
fig.d-Split.eps
Changing the Left-hand Tone
1.
Hold down the [Split] button and press the Tone button to choose a tone
group.
2.
Hold down the [Split] button and press the [-] [+] buttons to select a
variation tone.
fig.d-Split.eps
You can change the pitch of the left-hand tone an octave at a time. Refer to “Changing the Pitch of
the Tone in Octave Steps (Octave Shift)” (p. 84).
Switching Tone Groups and Tone Variations
LX-10_e.book 46 ページ ２００８年９月２２日 月曜日 午前１０時５１分