Roland LX-10 - Manual (Page 54)

54
Playing Back Songs
When playing back internal songs or external memory songs, you can select the
performance parts that will play.
You can also practice each hand separately while playing along with the song.
You can’t play back (mute) individual parts for audio data or a song from a music CD.
fig.Panel-TrackMute-e.eps
1. Select the song that you want to play (p. 50).
2.
Press the [ ] button to play the song.
3.
Select the part that you don’t want to play back.
Press the Track [Left] button, Track [Right] button, or the Track [Accomp] button.
The button you pressed will go out, and the corresponding part will no longer be heard.
Temporarily silencing a specific part in this way is called “muting.”
For example, if you want to practice the right-hand part, press the Track [Right] button so its
illumination is turned off. When you play back the song, the right-hand part will not play.
You can select the part that will be muted when you press the Track [Accomp] button and turn off its
light. Please refer to p. 82.
If you mute the accompaniment part before initiating playback, you can skip the intro.
4.
If you again press the button you selected in step 3, so the button is lit,
the sound of that part will be heard.
Mute settings will be cleared when you switch songs.
Listening to Each Part Separately
NOTE
The performance data is assigned to the Track buttons as shown below.
fig.TrackButtons-e.eps
The left-hand performance is assigned to the Track [Left]
button, the right-hand performance is assigned to the
Track [Right] button, and other performance is assigned to
the Track [Accomp] button. “Tracks” are areas in which
music files is held, and buttons [Left], [Right], and [Accomp]
are referred to as the “track buttons.”
Some songs don’t include an accompaniment.
If you select one of these songs, the [Accomp] button will not light.
Right-hand
Part
Accompaniment
Part
Left-hand Part
NOTE
LX-10_e.book 54 ページ ２００８年９月２２日 月曜日 午前１０時５１分