Listening to piano designer demo songs – Roland LX-10 User Manual
Page 27
27
Listening to Demo Songs
Here’s how you can listen to the differences in various sounds created by the Piano Designer
1.
Hold down the [Key Touch] button and press the [File] button.
The indicators for the Tone, [Twin Piano], and [Piano Designer] buttons flash.
The following appears in the display.
fig.d-Demo.eps
You can’t play back the demo songs if your recorded performance has not been saved. Either press
the [
] button to erase your performance (p. 26), or press [
] button and save your recorded
2.
Press the [Piano Designer] button.
Several of the tone buttons at the left and the [Piano Designer] button will flash.
The piano designer demo screen appears.
fig.d-DemoPnoDsgn1.eps
3.
Use the [
▲
] [
▼
] buttons to select the demo you want to hear.
4.
Press the flashing tone button.
The demo corresponding to the button you pressed will play.
fig.d-DemoPnoDsgn2.eps
By repeating steps 3 and 4, you can listen to other demos.
5.
Press the [Key Touch] button or the [File] button to exit Demo mode.
The indicators return to their previous state.
Listening to Piano Designer Demo Songs
NOTE
LX-10_e.book 27 ページ ２００８年９月２２日 月曜日 午前１０時５１分