Roland LX-10 - Manual (Page 84)

84
Various Settings
A “count-down” is when a count is sounded at the end of the
song’s introduction (before you begin playing the keyboard). If
you will be playing along with the song, sounding a count will
help you match the timing of your playing with the song.
You can select the sound that will be used to play the count-
down.
Specifies the part that will determine the beginning of the
performance when adding a count-down.
The count will sound before the selected part begins playing.
When you select another song, this setting will return
to “Right & Left Track.”
This setting specifies what the key transpose will affect.
You can use the key transpose to change the pitch of both the
song and the keyboard, the pitch of only the song, or the pitch of
only the keyboard.
→ Key Transpose (p. 38), Playback Transpose (p. 58)
You can change the pitch of the Tone 2 in Dual Play (p. 42) and
Lower Tone in Split Play (p. 45) an octave at a time.
Altering the pitch in one-octave units in this way is called “Octave
Shift.”
For example, you can raise the pitch of the Lower Tone to the
same pitch of the Upper Tone in Split Play.
The range of available pitch change spans from two octaves
higher to two octaves lower.
The pitch is lowered one octave each time the [-] button is
pressed, while each press of the [+] button raises the pitch by one
octave.
To return to the original pitch, press the [-] and [+] buttons
simultaneously.
This sets the velocity the sound will have when the keyboard
touch (p. 32) is set to “Fixed.”
If you turn the keyboard’s touch sensitivity “Fixed,” all notes will
sound at a fixed loudness regardless of how strongly you play the
keyboard. The setting described below specifies the loudness in
this case.
Sounding a Count Before the Melody
Begins (Countdown)
Setting Description
On A count is sounded
Off A count is not sounded
Selecting the Count-down Sound
(Countdown Sound)
Sound
Voice (English), Voice (Japanese)
Selecting the Part that Will Begin the
Count-down (Countdown Part)
Setting Description
Right & Left
Track
Right-hand and left-hand parts of a song
Left Track Left-hand part of a song
Right Track Right-hand part of a song
Part 1–16 Part 1–16
NOTE
Keyboard Settings
Specifying What the Key Transpose
will Affect (Transpose Mode)
Setting Description
Keyboard Keyboard notes
Song Song playback
Keyboard & Song Keyboard notes and song playback
Changing the Pitch of the Tone in
Octave Steps (Octave Shift)
Setting
-2–0–+2
Changing the Velocity When the Key
Touch is Set to “Fixed” (Fix Velocity)
Setting
1–127
LX-10_e.book 84 ページ ２００８年９月２２日 月曜日 午前１０時５１分