Roland Digital Grand RG-3F - Manual (Page 76)

76
Connecting to Other Devices
fig.Input-Audio2_e.eps
fig.Input-Audio_e.eps
1. Turn the volume all the way down on the RG-1F/RG-3F
and on the audio device.
2. Turn off the power to the RG-1F/RG-3F and audio device.
3. Use audio cables (commercially available) to make the
connection.
4. Switch on the connected audio device.
5. Switch on the RG-1F/RG-3F.
6. Adjust the volume level on the RG-1F/RG-3F and the
connected audio device.
The sounds from the connected audio device are played by
the RG-1F/RG-3F.
Adjust the volume by using the controls of your audio
device.
Turning Off the Power
1. Turn the volume all the way down on the RG-1F/RG-3F
and on the audio device.
2. Turn off the RG-1F/RG-3F.
3. Turn off the connected audio device.
Playing Sounds of an Audio Device through the
RG-1F/RG-3F
Portable audio
player, etc
RCA PIN
Input connector
Audio Set etc.
RG-1F3F_e.book 76 ページ ２０１０年１月１９日 火曜日 午前９時１分