Roland Digital Grand RG-3F - Manual (Page 66)

66
Making Various Settings
Here’s how to set the MIDI channel that the RG-1F/RG-3F will use
for transmission.
MIDI uses sixteen channels, numbered 1–16. When MIDI devices
are connected, sounds can be played or selected if the MIDI
channels of both devices match.
The RG-1F/RG-3F will receive all channels 1–16.
You can save this setting in the RG-1F/RG-3F’s memory
using the Memory Backup function (p. 72).
1. Press the [Piano Designer] button so the indicator is lit.
2. Use the [ ▲ ] [ ▼ ] buttons to select “8. MIDI.”
3. Press the [Enter] button.
4. Use the [ ▲ ] [ ▼ ] buttons to select “MIDI Tx Channel.”
fig.d-MIDI-TxCh.eps
5. Press the [+] or [–] button to set the MIDI Transmit
channel.
6. Press the [Piano Designer] button several times to make
the indicator go dark.
For details on connecting MIDI devices, refer to
“Connecting to MIDI Devices” (p. 77).
If the “Composer MIDI Out” setting is “On,” performance data
recorded on the RG-1F/RG-3F can be transmitted to a connected
MIDI device or computer.
You can save this setting in the RG-1F/RG-3F’s memory
using the Memory Backup function (p. 72).
1. Press the [Piano Designer] button so the indicator is lit.
2. Use the [ ▲ ] [ ▼ ] buttons to select “8. MIDI.”
3. Press the [Enter] button.
4. Use the [ ▲ ] [ ▼ ] buttons to select “Composer MIDI Out.”
fig.d-MIDI-MIDIOut.eps
5. Press the [+] or [–] button to switch the Composer MIDI
Out setting on or off.
6. Press the [Piano Designer] button several times to make
the indicator go dark.
Setting the MIDI Transmit Channel
Value Off, 1–16
Sending Recorded Performance Data to a MIDI
Device (Composer MIDI Out)
Value Description
On
The performance data recorded with the
RG-1F/RG-3F can be sent to the connected
MIDI device or computer.
Off
The performance data recorded with the
RG-1F/RG-3F cannot be sent to the connected
MIDI device or computer.
RG-1F3F_e.book 66 ページ ２０１０年１月１９日 火曜日 午前９時１分