Roland Digital Grand RG-3F - Manual (Page 69)

69
Making Various Settings
You can specify what will be transposed when you use the
Transpose function (p. 27) or the Playback Transpose function (p. 47).
You can transpose both the song and the keyboard, transpose
just the song, or transpose just the keyboard.
You can save this setting in the RG-1F/RG-3F’s memory
using the Memory Backup function (p. 72).
1. Press the [Piano Designer] button so the indicator is lit.
2. Use the [ ▲ ] [ ▼ ] buttons to select “9. Function.”
3. Press the [Enter] button.
4. Use the [ ▲ ] [ ▼ ] buttons to select “Mode.”
fig.d-Func-TMode.eps
5. Press the [+] or [–] button to set the transpose mode.
6. Press the [Piano Designer] button several times to make
the indicator go dark.
When you press the right pedal while using Dual performance or
Split performance, the pedal effect will normally apply to both
tones; but if desired, you can choose to apply it to only one tone.
You can save this setting in the RG-1F/RG-3F’s memory
using the Memory Backup function (p. 72).
1. Press the [Piano Designer] button so the indicator is lit.
2. Use the [ ▲ ] [ ▼ ] buttons to select “9. Function.”
3. Press the [Enter] button.
4. Use the [ ▲ ] [ ▼ ] buttons to select “Damper Pdl Part.”
fig.d-Func-DamperP.eps
5. Use the [+] [–] buttons to specify the part(s) affected by
the right pedal.
6. Press the [Piano Designer] button several times to make
the indicator go dark.
Selecting What Will Be Transposed
(Transpose Mode)
Value Description
Keyboard Keyboard notes
Song Song playback
Keyboard&Song Keyboard notes and song playback
Changing the Pedal Effect (Damper Pedal Part)
Value Description
R&L Applies to both tones
R
Applies only to tone 1 (for Dual performance) /
right-hand tone (for Split performance)
L
Applies only to tone 2 (for Dual performance) /
left-hand tone (for Split performance)
RG-1F3F_e.book 69 ページ ２０１０年１月１９日 火曜日 午前９時１分