Roland Digital Grand RG-3F - Manual (Page 64)

64
Making Various Settings
For some CDs, the piano may be unable to determine the type of
CD. In this case, you can manually specify the type of CD.
1. Press the [Piano Designer] button so the indicator is lit.
2. Use the [ ▲ ] [ ▼ ] buttons to select “7. Composer.”
3. Press the [Enter] button.
4. Use the [ ▲ ] [ ▼ ] buttons to select “CD/Audio Type.”
fig.d-Cmp-CDType.eps
5. Use the [+] [–] buttons to specify the type of CD you’ll be
playing.
6. Press the [Piano Designer] button several times to make
the indicator go dark.
Please note that some commercially available player
piano CDs cannot be played.
On some player piano CDs, the sound of the piano might not
match the timing of the accompaniment. If so, here’s how to
synchronize the sound of the piano and the accompaniment.
1. Press the [Piano Designer] button so the indicator is lit.
2. Use the [ ▲ ] [ ▼ ] buttons to select “7. Composer.”
3. Press the [Enter] button.
4. Use the [ ▲ ] [ ▼ ] buttons to select “CD/Audio Sync.”
fig.d-Cmp-CDSync.eps
5. Use the [+] [–] buttons to adjust the timing of the piano.
6. Press the [Piano Designer] button several times to make
the indicator go dark.
Specifying the Type of CD to Play
(CD/Audio Type)
Value Description
Auto The type of CD will be detected automatically.
Type A Typical CDs for player piano contain audio
data and MIDI data, and the data format will
differ according to the CD.
If the data format does not match the setting
of the RG-1F/RG-3F, a “beep” tone will sound.
Some player piano CDs cannot be played.
Type B
Stereo
Commercially available music CDs (not player
piano CDs)
Matching the Timing of the Piano and the
Automatic Accompaniment
Value Description
0–100
Higher settings will delay the timing at which
the piano is heard.
RG-1F3F_e.book 64 ページ ２０１０年１月１９日 火曜日 午前９時１分