Roland Digital Grand RG-3F - Manual (Page 63)

63
Making Various Settings
Normally, when you play back SMF music file (p. 88) that is
compatible with Roland digital pianos, the left-hand part will be
assigned to the Left track and the right-hand part will be
assigned to the Right track.
However, some SMF music file uses different track assignments
for the right-hand and left-hand parts.
If this setting is “Auto,” and the right-hand part and left-hand part
are not assigned appropriately, you can change this setting.
You can save this setting in the RG-1F/RG-3F’s memory
using the Memory Backup function (p. 72).
1. Press the [Piano Designer] button so the indicator is lit.
2. Use the [ ▲ ] [ ▼ ] buttons to select “7. Composer.”
3. Press the [Enter] button.
4. Use the [ ▲ ] [ ▼ ] buttons to select “Track Assign.”
fig.d-Cmp-TrackAsgn.eps
5. Use the [+] [–] buttons to change the track assignment
settings.
6. Press the [Piano Designer] button several times to make
the indicator go dark.
This setting will be applied when you select a song after
changing the setting.
Each song in a VIMA CD-ROM (VIMA TUNES) specifies
“recommended tones” that are appropriate for that song.
When you select a song, the recommended sound will be
assigned to the RG-1F/RG-3F’s tone buttons, and that tone
button will blink.
If you press the blinking tone button, the recommended tone will
be selected, letting you use a suitable sound to play along with
the selected song.
The RG-1F/RG-3F lets you choose whether the recommended
tone will be assigned automatically (On) or not (Off).
You can save this setting in the RG-1F/RG-3F’s memory
using the Memory Backup function (p. 72).
1. Press the [Piano Designer] button so the indicator is lit.
2. Use the [ ▲ ] [ ▼ ] buttons to select “7. Composer.”
3. Press the [Enter] button.
4. Use the [ ▲ ] [ ▼ ] buttons to select “Recommended Tone.”
fig.d-Cmp-Recommend.eps
5. Press the [+] or [–] button to switch the recommended
tone setting on or off.
* The factory setting is “On.”
6. Press the [Piano Designer] button several times to make
the indicator go dark.
Changing the Part Assigned to Each Track for
SMF Playback (Track Assign)
Value Description
Auto
Parts will automatically be assigned to the
tracks according to the song data.
2/1
Part 1 will be assigned to the Right track,
part 2 will be assigned to the Left track, and
other parts will be assigned to the Accomp
(accompaniment) track.
3/4
Part 4 will be assigned to the Right track,
part 3 to the Left track, and other parts will
be assigned to the Accomp
(accompaniment) track.
Turning Recommended Tones On/Off for a
VIMA CD-ROM
Value Description
On
The recommended tone will automatically
be assigned to the RG-1F/RG-3F’s tone
buttons.
Off
The recommended tone will not be
automatically assigned to the
RG-1F/RG-3F’s tone buttons.
RG-1F3F_e.book 63 ページ ２０１０年１月１９日 火曜日 午前９時１分