Roland Digital Grand RG-3F - Manual (Page 21)

21
Getting Ready
This instrument has two headphone jacks.
Since two people can use headphones simultaneously, this is
convenient for lessons or when playing duets.
It also allows you to play late at night without inconveniencing
other people.
fig.Phones.eps
1. Connect your headphones to a Phones jack in the jack
panel located on the bottom left of the piano.
If headphones are connected, no sound will be produced
from the piano’s speakers.
Use the front panel [Volume] knob to adjust the volume of
the headphones.
• Use headphones that have a stereo 1/4” phone plug.
• To prevent damage to the cord’s internal conductors, avoid
rough handling. When using headphones, mainly try to
handle either the plug or the headset.
• Your headphones may be damaged if the volume of a device
is already turned up when you plug them in. Minimize the
volume before you plug in the headphones.
• Excessive input will not only strain the headphones, but may
also damage your hearing. Please enjoy music at an
appropriate volume.
Whenever you are not using the headphones, you can hang
them on the headphone hook of the RG-1F/RG-3F.
1. Press and twist the headphone hook included with the
RG-1F/RG-3F into the hole in the bottom left of the
RG-1F/RG-3F (refer to the figure below).
2. Turn the headphone hook wing nut to secure the
headphone hook.
RG-1F
fig.Hook_e.eps
RG-3F
fig.Hook_3F_e.eps
Do not hang anything other than headphones on the
headphone hook. Doing so may damage the instrument
or the hook.
1. Turn the [LCD Contrast] knob located in the jack panel on
the RG-1F/RG-3F’s bottom left to adjust the brightness of
the display.
fig.Contrast.eps
Connecting Headphones Using the Headphone Hook
Adjusting the Contrast of the Screen
Headphone hook
Wing nut to
secure
Headphone hook
Wing nut to
secure
RG-1F3F_e.book 21 ページ ２０１０年１月１９日 火曜日 午前９時１分