Roland Digital Grand RG-3F - Manual (Page 68)

68
Making Various Settings
Here’s how Program Change (PC), Bank Select MSB, and Bank
Select LSB messages can be transmitted to a MIDI device. You can
also specify the transmit channel (Tx PC Channel).
1. Press the [Piano Designer] button so the indicator is lit.
2. Use the [ ▲ ] [ ▼ ] buttons to select “8. MIDI.”
3. Press the [Enter] button.
4. Use the [ ▲ ] [ ▼ ] buttons to select the item you want to
set, and use the [+] [–] buttons to change the value.
fig.d-MIDI-TxPC.eps/fig.d-MIDI-BankSel.eps
5. Press the [Piano Designer] button several times to make
the indicator go dark.
Here’s how to change the volume balance between the two
tones (tone 1 and tone 2) when using Dual performance.
1. Press the [Piano Designer] button so the indicator is lit.
2. Use the [ ▲ ] [ ▼ ] buttons to select “9. Function.”
3. Press the [Enter] button.
4. Use the [ ▲ ] [ ▼ ] buttons to select “Dual Balance.”
fig.d-Func-DBalance.eps
5. Press the [+] or [–] button to change the value.
6. Press the [Piano Designer] button several times to make
the indicator go dark.
Sending Tone Selection Messages
(Program Change/Bank Select MSB/Bank Select LSB)
Parameter Value Description
Tx PC
Channel
Off, 1–16
Specifies the transmit
channel for program changes.
PC
001 (00)–
128 (7F)
Specifies the program change.
Bank MSB,
Bank LSB 000 (00)–
127 (7F) Specifies the Bank Select
MSB/LSB.
Other Settings
Adjusting the Volume Balance for Dual
Performance (Dual Balance)
Value
1:9 (tone 2 is louder)–
5:5 (same volume)–
9:1 (tone 1 is louder)
RG-1F3F_e.book 68 ページ ２０１０年１月１９日 火曜日 午前９時１分