Roland Digital Grand RG-3F - Manual (Page 50)

50
Recording Your Performance
Please note when recording
You can save your recorded performance to “Favorites” (p. 44). If you turn off
the power without saving your recorded performance to “Favorites,” the
recorded content will be lost.
If you want to keep your recorded performance, you must save it to “Favorites.”
You can also save performance data to USB memory (p. 52).
1
Select the tone that you want to play (p. 22).
2
Make metronome settings as desired (p. 28).
3
Press the [Rec] button.
The [Play/Stop] button will blink.
Start recording
4
Press the [Play/Stop] button or play the keyboard to start recording.
If you started recording by pressing the [Play/Stop] button, recording will begin
after a two-measure count is sounded.
If you started recording by playing the keyboard, no sound will be sounded.
During recording, the indication “Recording...” will blink.
fig.d-Song_recording.eps
Stop recording
5
Press the [Play/Stop] button.
Recording will stop.
The following screen will appear.
fig.d-Song_new.eps
Recording Your Performance
Please use USB memory sold
by Roland.
Operation cannot be
guaranteed if other USB
memory is used (p. 15).
RG-1F3F_e.book 50 ページ ２０１０年１月１９日 火曜日 午前９時１分