Roland Digital Grand RG-3F - Manual (Page 24)

24
Playing
You can add a pleasant reverberation to the sounds you play from the
keyboard, producing the impression that you’re playing in a concert hall.
This effect is called “Reverb.”
1
Press the [Reverb] button.
fig.Rev-Button.eps
The [Reverb] button will light; reverb will be applied to the sounds you play
from the keyboard.
To cancel the reverb effect, press the [Reverb] button once again so its
illumination is turned off.
1
Hold down the [Reverb] button and press the [+] or [–] button.
The screen will indicate the reverb depth setting.
fig.d-RevDepth.eps
Higher values produce deeper reverb.
* You can’t set the reverb depth individually for each tone. Each tone will have
the same reverb depth.
* The depth of the reverb applied to song playback will not change.
Adding Reverberation (Reverb)
Adjusting the Reverb Depth
Range 1–10
You can save this setting in
the RG-1F/RG-3F’s memory
using the Memory Backup
function (p. 72).
RG-1F3F_e.book 24 ページ ２０１０年１月１９日 火曜日 午前９時１分