beautypg.com

Connecting to audio equipment, Enjoy powerful sound (p. 75) – Roland Digital Grand RG-3F User Manual

Page 75

background image

75

Connecting to Other Devices

If you connect the RG-1F/RG-3F to powered speakers or to an

audio system that has line input jacks, you’ll be able to hear the

RG-1F/RG-3F’s sound from your powered speakers or audio

system. If you connect your portable audio player or other audio

playback device to the RG-1F/RG-3F, you’ll be able to hear its

sound via the RG-1F/RG-3F.

Use audio cables (commercially available) to make connections.

When connection cables with resistors are used, the

volume level of equipment connected to the inputs

jacks may be low. If this happens, use connection cables

that do not contain resistors.

921

To prevent malfunction and/or damage to speakers or

other devices, always turn down the volume, and turn

off the power on all devices before making any

connections.

fig.Output-SP_e.eps

1.

Turn the volume all the way down on the RG-1F/RG-3F

and on the speaker.

2.

Turn off the power to the RG-1F/RG-3F and speakers.

3.

Use audio cables (commercially available) to make the

connection.

4.

Switch on the RG-1F/RG-3F.

5.

Switch on the connected speakers.

6.

Adjust the volume level on the RG-1F/RG-3F and the

connected speakers.

When you play the RG-1F/RG-3F’s keyboard, the sound is

played from the RG-1F/RG-3F’s and connected speakers.

Turning Off the Power

1.

Turn the volume all the way down on the RG-1F/RG-3F

and on the connected speakers.

2.

Turn off the connected speakers.

3.

Turn off the RG-1F/RG-3F.

Connecting to Audio Equipment

Connecting Speakers to the RG-1F/RG-3F and
Outputting Sounds

Audio Set etc.

RG-1F3F_e.book 75 ページ 2010年1月19日 火曜日 午前9時1分