Ricoh AP2610N User Manual

Page 77

Installing the PostScript Printer Driver

• Under Windows 2000/Windows XP and Windows NT 4.0, [Enable bidirec-

tional support]

must be selected and [Enable printer pooling] must not be se-

lected on the [port] tab with RPCS printer driver.

❖

❖ When connecting with the network

• The printer must be set to bidirectional transmission.
• SmartNetMonitor for Client included on the CD-ROM must be installed,

and the TCP/IP protocol must be used.

• Under Windows 95/98/Me, [Enable bidirectional support for this printer] must

be selected in [Spool Settings…] on the [Details] tab with RPCS printer driver.

• Under Windows 2000/Windows XP and Windows NT 4.0, [Enable bidirec-

tional support]

must be selected and [Enable printer pooling] must not be se-

lected on the [port] tab with RPCS printer driver.

• Under Windows NT 4.0, specified IP address in the Microsoft TCP/IP

print is used.

❖

❖ When connecting with IEEE 1394

• The printer must be connected to the IEEE 1394 connector of a computer

using the IEEE 1394 interface cable.

• [Activate] is selected in the SCSI print of IEEE 1394 and [Activate] is selected

in the Bidi-SCSI print.

• Under Windows 2000/Windows XP and Windows NT 4.0, [Enable bidirec-

tional support]

must be selected and [Enable printer pooling] must not be se-

lected on the [port] tab with RPCS printer driver.

❖

❖ When connecting with USB

The printer must be connected to the USB connector of a computer using the
USB interface cable.

-Cautions when connecting the USB interface cable and the IEEE

1394 interface cable

Limitation

❒ Do not unplug the cable while printing. Do not turn off the printer power

while printing or during bidirectional transmission.