Ricoh AP2610N - Manual (Page 32)

Installing Options
18
2
Memory Unit TypeB 64MB
Important
❒ Before touching the Memory Unit,
touch something metal to dis-
charge any static electricity. Static
electricity can damage the Memo-
ry Unit.
AAAA
Check the contents of the box for
the following items:
• Memory Unit
• Installation Guide
BBBB
Confirm that the followings are
true:
• The power switch is turned off.
• The interface cable is un-
plugged from the printer.
Note
❒ If the Duplex Unit is not at-
tached, go to step D .
CCCC
If the Duplex Unit is attached,
push down the lever on right side
(
A A A A) and pull out the Duplex Unit
until it stops (
B B B B).
DDDD
Use a coin to remove the two
screws.
Note
❒ The removed screws are re-
quired in step K .
EEEE
Pull out the handle of the control-
ler board.
FFFF
Pull the handle and slide the con-
troller board out.
ZGDX320J
ZGDX280J
ZGDX370J
ZGDX260J