Ricoh AP2610N - Manual (Page 63)

IEEE 802.11b (Wireless LAN) Configuration
49
3
FFFF
Press
{{{{Enter #}}}}.
The following message appears on
the panel display.
GGGG
Press
{{{{U U U U}}}} or {{{{T T T T}}}} to select the
transmission mode.
HHHH
Press
{{{{Enter #}}}}.
The display returns to the previous
menu in a few seconds.
IIII
Set "Trans. Speed" and "WEP Set-
tings" in the same way.
For more information about WEP
Settings, see "Using the IEEE
802.11b (Wireless LAN)" in the
Network Printing Guide.
JJJJ
If "Ad hoc" is selected for "Comm.
Mode", set the channel to use for
transmission.
Note
❒ Confirm the network adminis-
trator for the channel to use.
A Press {{{{U U U U}}}} or {{{{T T T T}}}} to display
"Channel".
B Press {{{{Enter #}}}}.
The channel currently used ap-
pears on the panel display.
C Press {{{{U U U U}}}} or {{{{T T T T}}}} to enter the
channel.
D Press {{{{Enter #}}}}.
KKKK
Press
{{{{On Line}}}}.
“Ready” appears on the panel dis-
play.
LLLL
Print a configuration page to con-
f i r m t h e s e t ti n g s m a d e . S e e
"Printing a Configuration Page"
in the Printer Reference.
The settings are now complete. Go
to p.51 “Installing the Printer Driv-
er and Software”.
- - - -Address
❖ ❖ ❖ ❖ Subnet Mask
A number used to mathematically
“mask” or hide an IP address on
the network by eliminating those
parts of the address that are alike
for all the machines on the net-
work.
❖ ❖ ❖ ❖ Gateway Address
A gateway is a connection or inter-
change point that connects two
networks. A gateway address is for
the router or host computer used
as a gateway.
Note
❒ To get the addresses, contact
your network administrator.
Comm. Mode:
*Ad hoc
IEEE 802.11b:
Channel
Channel:
(1-11) 11
Ready