Ricoh AP2610N - Manual (Page 381)

Using the IEEE 802.11b (Wireless LAN)
91
7
Confirming the Connection
AAAA
Make sure the LED of the IEEE
802.11b card is lit.
1. If the IEEE 802.11b card is on, it
lights in orange. If the IEEE 802.11b
(wireless LAN) is not selected, it
does not light, even if the printer
power is on.
2. If it is connected properly to a net-
work, the LED lights in green with
infrastructure mode, it is not con-
nected to a network. Check the net-
work environment.
BBBB
Use a Web browser to check that
the printer is connected properly.
See p.76 “Configuring the Net-
work Interface Board with a Web
Browser”.
CCCC
Print the configuration page to
verify the settings.
For information about how to print
the configuration page, see the Set-
up Guide.
ZGDH600J
1
2