Hard disk drive type 2600 – Ricoh AP2610N User Manual

Page 46

Installing Options

Hard Disk Drive Type 2600

Important

❒ Before touching the Hard Disk

Drive, touch something metal to
discharge any static electricity.
Static electricity can damage the
Hard Disk Drive.

AAAA

Check the contents of the box for
the following items:
• Hard Disk Drive
• Installation Guide

BBBB

Confirm that the followings are
true:
• The power switch is turned off.
• The interface cable is un-

plugged from the printer.

CCCC

Use a coin to remove the two
screws, and then remove the cov-
er.

Note

❒ The screws and cover are not

used when installing the Hard
Disk Drive.

DDDD

Slowly insert the Hard Disk
Drive while aligning it with the
top and bottom rails in the printer
until it stops.

EEEE

Fasten the Hard Disk Drive.

FFFF

Attach the interface cable to the
printer.

GGGG

Plug the printer's power cord
back into the wall outlet, and then
turn on the power switch.
The following message appears on
the panel display.

ZCEX350J

HDD Error

Initialize ?

ZCEX151J

ZCEX360J