Ricoh AP2610N - Manual (Page 365)

Using SmartNetMonitor for Admin
75
7
Managing the User Information
AAAA
Run SmartNetMonitor for Admin.
BBBB
Click the [Group] menu, point to [Open LAN], and then select [TCP/IP] or
[IPX/SPX]
.
A list of printer appears.
Note
❒ Select the protocol of the printer you want to change its configuration.
CCCC
On the list, Select a printer whose statistics information you want to man-
age.
DDDD
From the [Tools] menu, select [User Management Tool].
The screen that prompts you to type a password appears.
EEEE
Type the password, and then click [OK].
Note
❒ The factory default password is "password".
The User Code Maintenance Tool starts up.
For more information about using the User Management Tool, see SmartNet-
Monitor for Admin Help.
Configuring the Energy Save Mode
AAAA
Run SmartNetMonitor for Admin.
BBBB
Click the [Group] menu, point to [Open LAN], and then select [TCP/IP] or
[IPX/SPX]
.
A list of printer appears.
Note
❒ Select the protocol of the printer you want to change its configuration.
CCCC
Click [Group], point to [Energy Save Mode], and select any energy saver mode
from the menu that appears.
For more information about settings, see SmartNetMonitor for Admin Help.