8 go from address, 9 cancel operation, 10 configure flash project – Renesas Single-Chip Microcomputer M306NKT3 User Manual

Page 93: 8 help menu, 1 help topics, 2 technical support, 3 about

7.7.8

Go From Address...

This launches a dialog that allows the user to select an address to execute code from. There is an option
to select an indirect address mode, so that the address referenced is itself an address of where the code
needs to run from.

7.7.9

Cancel Operation

Cancels the current FLASH operation.

7.7.10

Configure Flash Project

Displays the Flash Properties dialog or launches the Project Wizard if the device is not yet configured.

7.8

Help Menu

The ‘Help’ menu is used to access additional information on how to use the functionality provided by FDT.

7.8.1

Help Topics

Launches the Help system for FDT. The ‘Help Topics’ dialog box for FDT is displayed, enabling help
to be accessed on required FDT subjects through several methods.

7.8.2

Technical Support

This allows the user to report a problem with FDT, or to check the website for the latest updates.

7.8.3

About...

Launches the ‘About Flash Development Toolkit’ dialog box, through which additional information
regarding FDT can be accessed: