Renesas Single-Chip Microcomputer M306NKT3 - Manual (Page 105)

89
8.5.2 Communications Tab
This shows the default and current baud rates and the current port. It also allows the user to change the
Port and Baud Rate when disconnected.
Figure 8-9 Communications Properties
Port
This drop-down list provides the user with a list of supported COM ports available for
connection to the device. This list includes the USB port options.
Baud Rate
Display the currently selected Baud Rate. Double clicking invokes the Project Wizard to allow
editing of this item.
Default Baud Rate
Display the Default Baud Rate.
Use default baud
If this is checked, the default Baud Rate will be used. (This option should be set only when the
Renesas Evaluation Board or Evaluation Development Kit is used.)