Roland ATELIER AT-500 - Manual (Page 89)

87
Using Rhythm Performance
Using Rhythm Performance
User memory (p. 72) already contains Rhythms, but you can replace these
Rhythms with Rhythms from USB memory or floppy disk. Rhythms copied from
the USB memory into User memory will not be lost even if the power is turned
off. It is convenient to copy frequently-used Rhythms into User memory.
Rhythms that you’ve created and saved in user memory can also be copied to
USB memory (p. 89).
Copying Rhythms from USB Memory to User Memory
1.
Connect the USB memory to the External Memory
connector.
2.
Touch on the Main screen.
The Rhythm screen appears.
fig.02-09.eps
3.
Touch < > (Utility) on the Rhythm screen.
The Utility screen appears.
fig.02-10.eps
Copying Rhythms
If you want to copy Rhythms
from floppy disk, connect the
floppy disk drive to the Ext
Drive connector.
AT-500_e.book 87 ページ ２００８年７月２８日 月曜日 午後４時１７分