Roland ATELIER AT-500 User Manual
Page 54
52
Selecting and Playing Sounds
A sub-window appears, allowing you to select a sound group.
fig.01-16.eps
4.
In the sub-window, touch a sound group name to select the
desired sound group.
The indicator of the selected [Others] button will blink.
The Others Voice screen appears, showing the sounds of the specified sound
group.
fig.01-17.eps
5.
Touch <
> <
> to switch screens, and touch a voice
name to select a voice.
6.
Once again, press the blinking [Others] button to confirm
the voice.
The indicator of the [Others] button will change from blinking to lit.
You can touch
the Voice Select screen to have
only the Active Expression
voices be displayed.
“Active Expression voices” can
be assigned to the [Others]
buttons of the Upper Orchestral
part, Lower Orchestral part,
Pedal part, and Solo part.
For more on the active
expression voices, refer to
“Performing with an Active
Expression Voice” (p. 59).
You can also confirm the voice
by touching
Others Voice (Other Voice
select) screen. You can also
press the key for the part
containing a changed voice to
confirm the voice setting.
For more information about the
voices that can be assigned to
an [Others] button, please refer
to “Voice List” (Appendix:
separate booklet).
AT-500_e.book 52 ページ ２００８年７月２８日 月曜日 午後４時１７分