Roland ATELIER AT-500 - Manual (Page 66)

64
Selecting and Playing Sounds
The pitch of the sound played by the keyboard can be adjusted in one-octave
steps. This function is called “Octave Shift.” You can apply an Octave shift to
all Parts.
1.
Touch on the Main screen.
fig.00-06.eps
The Sound/Keyboard screen appears.
fig.VoiceList.eps
2.
Touch either , , or .
3.
Touch < > < > to display the Octave Shift.
Transpose the Pitch in Octave Units (Octave Shift)
Menu Part whose pitch will change
Upper To change the pitch of the Upper and Solo part
Lower To change the pitch of the Lower part
Pedal To change the pitch of the Pedal part
AT-500_e.book 64 ページ ２００８年７月２８日 月曜日 午後４時１７分