Roland ATELIER AT-500 - Manual (Page 101)

99
Using the Registration Buttons
Using the Registration Buttons
Settings for Rhythm play and Automatic Accompaniment are recalled when
you continue holding a Registration button [1]–[8] for several seconds, but you
can change this so that the settings are recalled the instant you press the
button.
1.
Touch on the Main screen.
The Registration Load screen appears.
fig.03-05.eps
2.
Touch < > (Utility).
The Utility screen appears.
fig.03-06.eps
3.
Touch .
The Registration Options screen appears.
fig.03-07.eps
Changing the Timing of Recalling Registrations
You can also open the
Registration Load screen by
pressing the [Registration]
button on the panel.
You can also use the following
method to open the Registration
Options screen.
1. Touch on the
Main screen, to display the
Quick Guide screen.
2. Press the Registration
[Write] button.
The Registration Options
screen appears.
AT-500_e.book 99 ページ ２００８年７月２８日 月曜日 午後４時１７分