Roland ATELIER AT-500 - Manual (Page 150)

148
Using the Lower Keyboard Effectively
This setting is used to determine the Solo Split Point (lower limit
of the playable range of the Solo voice) on the Lower
keyboard to any desired position.
1. Touch on the Main screen.
fig.05-08.eps
The Sound/Keyboard screen appears.
fig.VoiceList.eps
2. Touch .
The Split Point screen appears.
fig.06-13.eps
3. Touch < > < > to change the Solo Split
Point.
The key used for the solo split point is included in the Solo
voice range.
4. Touch .
Changing the Solo Split Point
Setting
A1–C7
You can also set the split point by pressing the key of
the lower keyboard that you want to be the Solo Split
Point.
fig.06-13-2.eps
1. While touching the Solo Split Point value (A1–
C7 indication) in the Split Point screen, press
the key in the Lower keyboard that you want to
specify as the Solo Split Point.
The Solo Split Point will be set.
AT-500_e.book 148 ページ ２００８年７月２８日 月曜日 午後４時１７分