Ricoh RDC-i700 - Manual (Page 97)

95
4
Changing the Camera Settings
D
Specify the location and file name and then click on [Save].
The camera settings will be saved in the PC.
Note
• The file name extension [.bak] will be automatically attached at the
end of the file name.
Restoring the Backup Settings to the Camera
This function enables you to restore the camera settings file saved on the PC
disk to the camera.
Important
Note
• If you restore the settings, all the settings currently in effect will be
overwritten.
A
Check that the camera is properly connected to the PC, that the
camera and the PC are turned on, and that the camera’s mode dial
is set to [
].
B
Start up the browser by the PC , input the IP address and display
the camera’s homepage.
See
• P.28 “Opening the Camera’s Homepage on the Browser”
C
Click on [Browse...].
The dialog box for selecting the backup file will be displayed.