Ricoh RDC-i700 - Manual (Page 89)

87
4
Changing the Camera Settings
Quick Send Settings
This section explains how to set the dial-up account and send-to account for
Quick Send.
Note
• For details of how to use the Quick Send, refer to “Sending an Image
using Quick Send” in the ‘Communication/Internet’ operation manual.
• For details of the various settings, refer to “Setting Quick Send” in the
‘Communication/Internet’ operation manual.
Displaying the Quick Send Dial-Up Accounts
This function enables you to display the list of dial-up accounts for Quick Send
set in the camera.
A
Check that the camera is properly connected to the PC, that the
camera and the PC are turned on, and that the camera’s mode dial
is set to [
].
B
Start up the browser by the PC, input the IP address and display
the camera’s homepage.
See
• P.28 “Opening the Camera’s Homepage on the Browser”
C
Click on [SET-UP].
D
Click on [QUICK SEND].