Ricoh RDC-i700 - Manual (Page 165)

163
Appendix
Error Messages
In the case of misoperation or of failure due to some problem or other, an error
message will be displayed. This section deals with the causes and remedies of
problems.
Note
• This section explains the error messages displayed on the PC screen.
For details of the error messages displayed on the camera monitor,
refer to the ‘Camera’ operation manual and ‘Communication/Internet’
operation manual.
Error Messages Displayed on the Web Browser
These error messages are displayed when accessing the camera on the Web
browser.
■ Common Error Messages
Error Message
400 Bad Request
404 Not Found
405 Method Not Allowed
500 Internal Server Error
■ Error Messages Displayed on Camera Control Screen
Error Message
Internal Error
No PCMCIA Card
Cause and Remedy
Error occurred in transmission of data between
browser and camera. Check connection and
perform operation again.
Error occurred in transmission of data between
browser and camera. Check connection and
perform operation again.
Error occurred in transmission of data between
browser and camera. Check connection and
perform operation again.
Error occurred inside server. Check connection and
perform operation again.
Cause and Remedy
Error has occurred in transmission of data between
browser and camera. Click on [Back] button, check
connection and perform operation again.
PC card has been specified as recording
destination, but no card has been inserted. Click on
[Back] button.
CF card has been specified as recording
destination, but no card has been inserted. Click on
[Back] button. No CF Card