Ricoh RDC-i700 - Manual (Page 102)

100
Using the Image Capture Guide List on Excel
This section explains the series of operations involved in creating an Image
Capture Guide List (hereafter referred to as Guide List) based on an Excel table
and transferring it to the camera, recording images according to the list and
incorporating the recorded images in a table.
Important
Note
• The Guide List Tool Kit can only be used on PCs running Windows. It
cannot be used on a Macintosh.
• An explanation of how to install the Guide List Tool Kit is given in
Chapter 1.
• If you are using Excel 2000, select [Tool]
→
[Macro]
→
[Security] in
advance and set the [Security Level] to [Medium].
Note
• You can also edit a sample template and create an original Excel
document. For details, refer to [Readme] (in the [Excel template] folder
in the [My Document] folder).
• If the Guide List Tool Kit was installed with no changes made to the
standard settings, an [Excel template] folder containing sample
documents can be created in the [My Document] folder.
• Use the sample template files in the folder by renaming the file name.
Creating a Guide List
This function enables you to create a Guide List file from sample Excel
templates.
A
Insert the CF or PC card which you have formatted with the
camera.
B
Start Microsoft Excel and open [Sample1.xlt].
If standard installation has been performed, [Sample1.xlt] is in the [Excel
Template] folder in the [My Document] folder.
The message confirming that the documents contain macro will be displayed.