Ricoh RDC-i700 - Manual (Page 23)

21
1
Getting Started
C
Insert the connector on the other end
of the cable into the USB port of the
PC.
D
Turn the camera on.
The PC will automatically detect the
equipment which has been connected and
operate accordingly. If a message is
displayed, follow the instructions on the
screen.
USB connection is completed.
From this point you can connect and disconnect the camera and PC at any time
simply by inserting or removing the USB cable. The cable can be inserted or
removed with the power turned on.
■ Connecting the Camera by USB Cable (For Macintosh)
You can connect the camera to a Macintosh using the USB cable supplied with
the camera.
A
Open the terminal cover on the right
side of the camera.
B
Insert the flat connector on one end
of the USB cable supplied into the
USB/AUX terminal of the camera with
the seal facing up.
C
Insert the connector on the other end
of the cable into the USB port of the
PC.