Ricoh RDC-i700 - Manual (Page 30)

28
Controlling the Camera from the Browser
You can access the camera’s homepage from the PC using the Web browser
and view data recorded in the camera or make various camera settings. This
section explains how to access the homepage.
Preparing the Camera
To perform an operation when the camera is connected to a PC, set the mode
dial to [
] (PC).
A
Check that the camera and PC are properly connected.
See • P.20 “Connecting the Camera to a PC”
B
Check that the camera and the PC are turned on.
C
Set the mode dial to [ ] (PC).
Opening the Camera’s Homepage on the Browser
Start up the Internet Explorer or Netscape Communicator browser and open the
camera’s built-in homepage.
Important
Note
• When you can not connect the camera by controlling the browser,
check that the proxy server is correctly configured.
→
P.170 “Checking
the Proxy Server”
A
Start up the browser on the PC.
B
Check that the [IP address] is displayed on the camera’s LCD
monitor.
The address is displayed in the form of [xxx.xxx.xxx.xxx] (figures separated by
dots).