Ricoh RDC-i700 - Manual (Page 72)

70
Modem Settings
This section explains how to set the modem loaded in the PC card slot of the
camera (or connected to the camera).
Note
• For details of the modem settings, refer to ‘Checking the Modem
Settings’ in the ‘Communication/Internet’ operation manual.
A
Check that the camera is properly connected to the PC, that the
camera and the PC are turned on, and that the camera’s mode dial
is set to [
].
B
Start up the browser by the PC, input the IP address and display
the camera’s homepage.
See • P.28 “Opening the Camera’s Homepage on the Browser”
C
Click on [SET-UP].
D
Click on [MODEM SETTING].